fix(ci): gate the release-bump commit — nothing has ever tested it

Found from the other end: the koala cluster's CIHeadUncovered{repo=skills}
alert had been firing for 85 hours, and it is a true positive.

    mathias/skills main HEAD   f031c2b
    workflow runs for that sha  0

Not a one-off. The previous release-bump commit has the same property:

    6cc224f  chore(release): plugin.json version 0.19.4  ->  0 runs
    f031c2b  chore(release): plugin.json version 0.19.5  ->  0 runs

The `tag` job pushes the manifest bump itself with secrets.GITEA_TOKEN, and a
push authenticated with the Actions token does not trigger workflows -- that is
deliberate platform behaviour to stop CI recursing. The `Skip-Release: true`
trailer stops the TAGGER recursing and works; nothing stopped the whole run,
`gate` included, from never firing on that commit.

So after every release, main's HEAD is a commit no CI has seen, until an
unrelated human push moves it. CIHeadUncovered therefore cannot clear on its
own -- and an alert that can only be cleared by doing something unrelated is
worse than a noisy one, because it teaches the reader that red is the normal
state of that rule.

The commit is not cosmetic either. plugin.json's version is what Claude Code
gates plugin updates on, `task check` asserts it is not behind the latest tag,
and the sed-and-retry logic that writes it already shipped a mismatched
manifest once -- v0.10.0 tagged with the manifest still reading 0.9.0, per the
comment above that very loop.

Fix: run `task check` on the bump commit before pushing it. The commit is
produced in that step, so it can be validated in that step -- one check instead
of a second full CI run, and no recursion risk to reintroduce.

Considered and rejected: re-triggering CI with a different credential after the
push (costs a full run per release and brings back what the token behaviour
exists to prevent), and teaching CIHeadUncovered to ignore manifest-only
commits (narrowing the measure to fit the system, and it would hide a real gap
too).

The assertion in tests/ci_gate_test.sh had to be anchored with ^[^#]*: the tag
job's own prose says "`task check` asserts the manifest is not behind the
latest tag", so a bare grep matched the comment explaining the problem and
reported the problem fixed.

Closes #46.

.claude-plugin/plugin.json

@@ -1,7 +1,7 @@
 {
   "name": "skills",
   "description": "Mathias's engineering skills library, plus the hooks and MCP servers that make it enforceable: TDD, clean code, debugging, specs, discovery, CI, and secret hygiene.",
-  "version": "0.19.2",
+  "version": "0.19.5",
   "author": {
     "name": "Mathias",
     "url": "https://git.d-ma.be/mathias"

.gitea/workflows/ci.yml

@@ -133,6 +133,33 @@ jobs:
             git add "$manifest"
             # The trailer below stops this push from re-triggering the tagger.
             git commit -m "chore(release): plugin.json version $version" -m "Skip-Release: true"
+
+            # skills#46. This commit is pushed with secrets.GITEA_TOKEN, and a
+            # push authenticated with the Actions token does NOT trigger
+            # workflows -- deliberate platform behaviour to stop CI recursing.
+            # `Skip-Release: true` stops the tagger recursing; nothing stopped
+            # the whole run, `gate` included, from never firing on this commit.
+            #
+            # So every release left main's HEAD with zero CI runs. Measured:
+            # 6cc224f (0.19.4) and f031c2b (0.19.5) each have none, and the
+            # koala cluster's CIHeadUncovered{repo=skills} had been firing on it
+            # for 85 hours -- an alert that can only be cleared by an unrelated
+            # human push.
+            #
+            # The commit is not cosmetic: plugin.json's version is what Claude
+            # Code gates plugin updates on, `task check` asserts it is not
+            # behind the latest tag, and the sed-and-retry logic above already
+            # shipped a mismatched manifest once (v0.10.0 reading 0.9.0).
+            #
+            # Gating it HERE rather than re-triggering CI afterwards: the commit
+            # is produced here, so it can be validated here, at the cost of one
+            # `task check` instead of a second full run -- and with no recursion
+            # risk to reintroduce.
+            if ! task check; then
+              echo "::error::the release-bump commit fails task check -- not pushing it" >&2
+              exit 1
+            fi
+
             if git push origin HEAD:main; then
               echo "bumped $manifest to $version"
               exit 0

bin/doctor

@@ -327,6 +327,44 @@ if [ "$ONLINE" -eq 1 ]; then
   fi
 fi
 
+# --- toolchain: golangci-lint must be built with Go >= GOROOT ---------------
+# infra#375, second recurrence. golangci-lint embeds the go/types export-data
+# reader from the Go it was BUILT with. When GOROOT is newer, that reader
+# cannot decode the stdlib and the linter dies:
+#
+#   panic: file requires newer Go version go1.27 (application built with go1.26)
+#
+# An earlier form printed a typecheck error naming the user's own file, which
+# sends people to debug code that is fine. It cost time in two repos before
+# anyone recognised it as a host fault rather than a repo fault.
+#
+# It is invisible to CI -- the runner image has matching versions -- so it
+# breaks exactly the local `task check` that AGENT.md requires before a push,
+# and nothing else. That is why it belongs in doctor: the signal was missing,
+# not the fix.
+#
+# Fails open on anything unparseable. A host with no Go toolchain is a normal
+# host, not a broken one, and doctor runs in a SessionStart hook everywhere.
+ver_lt() {
+  # 0 when $1 < $2 on major.minor. Deliberately not sort -V: this is POSIX sh
+  # that also runs on macOS, and the export-data format is minor-versioned, so
+  # patch level does not enter into it.
+  _a=${1%%.*}; _ar=${1#*.}; _am=${_ar%%.*}
+  _b=${2%%.*}; _br=${2#*.}; _bm=${_br%%.*}
+  case "$_a$_am$_b$_bm" in *[!0-9]*) return 1 ;; esac
+  [ "$_a" -lt "$_b" ] && return 0
+  [ "$_a" -gt "$_b" ] && return 1
+  [ "$_am" -lt "$_bm" ]
+}
+
+if command -v golangci-lint >/dev/null 2>&1 && command -v go >/dev/null 2>&1; then
+  lint_go=$(golangci-lint --version 2>/dev/null | sed -n 's/.*built with go\([0-9][0-9.]*\).*/\1/p' | head -1)
+  root_go=$(go version 2>/dev/null | sed -n 's/.*go version go\([0-9][0-9.]*\).*/\1/p' | head -1)
+  if [ -n "$lint_go" ] && [ -n "$root_go" ] && ver_lt "$lint_go" "$root_go"; then
+    add FAIL toolchain "golangci-lint built with go$lint_go but GOROOT is go$root_go — lint panics on every Go repo; reinstall it under the current toolchain (infra#375)"
+  fi
+fi
+
 # --- output -----------------------------------------------------------------
 if [ "$JSON" -eq 1 ]; then
   printf '{"checkout":"%s","expected":%s,"plugin":{"installed":"%s","available":"%s"},"findings":[%s]}\n' \

tests/ci_gate_test.sh

@@ -53,5 +53,31 @@ printf '%s' "$tag_job" | grep -qE '^ +needs: *gate' \
   && ok 'ungated release.yml removed' \
   || no 'ungated release.yml removed'
 
+# skills#46. The manifest-bump commit is created and pushed by the `tag` job
+# using secrets.GITEA_TOKEN, and a push authenticated with the Actions token
+# does not trigger workflows -- deliberate platform behaviour to stop CI
+# recursing. So the ONE commit in this repo that no CI run has ever seen is the
+# one the release job writes, every release:
+#
+#   6cc224f  chore(release): plugin.json version 0.19.4   ->  0 runs
+#   f031c2b  chore(release): plugin.json version 0.19.5   ->  0 runs
+#
+# The koala cluster's CIHeadUncovered{repo=skills} alert had been firing on it
+# for 85 hours when this was found, and it cannot clear on its own -- only an
+# unrelated human push moves main's HEAD to a tested commit.
+#
+# The commit is not nothing: plugin.json's version is what Claude Code gates
+# plugin updates on, `task check` asserts it is not behind the latest tag, and
+# the sed-and-retry logic that writes it already shipped a mismatched manifest
+# once (v0.10.0 with the manifest reading 0.9.0).
+#
+# Anchored past comments: the tag job's prose already SAYS "`task check`
+# asserts the manifest is not behind the latest tag", and a bare grep matches
+# that and passes. A grep for a concept matches the rationale, and the more
+# carefully a thing is documented the more likely that is.
+printf '%s' "$tag_job" | grep -qE '^[^#]*task check' \
+  && ok 'the release-bump commit is gated before it is pushed' \
+  || no 'the release-bump commit is pushed with no gate -- nothing ever tests it (#46)'
+
 printf '\nci_gate: %d passed, %d failed\n' "$pass" "$fail"
 [ "$fail" -eq 0 ]

tests/doctor_test.sh

@@ -24,6 +24,18 @@ if [ ! -f "$DOCTOR" ]; then
   exit 1
 fi
 
+# The toolchain check (golangci-lint build-Go vs GOROOT) reads the real host
+# unless we say otherwise, which made every unrelated fixture fail on a machine
+# whose golangci-lint is genuinely stale. Give the whole suite a matching fake
+# pair so only the cases that OPT IN exercise that check.
+STUB_BIN="$WORK/_stub_bin"
+mkdir -p "$STUB_BIN"
+printf '#!/bin/sh\nprintf "golangci-lint has version 2.0.0 built with go1.27.0 from abc\\n"\n' > "$STUB_BIN/golangci-lint"
+printf '#!/bin/sh\ncase "$1" in version) printf "go version go1.27.0 linux/amd64\\n";; *) printf "\\n";; esac\n' > "$STUB_BIN/go"
+chmod +x "$STUB_BIN/golangci-lint" "$STUB_BIN/go"
+PATH="$STUB_BIN:$PATH"
+export PATH
+
 cleanup() { rm -rf "$WORK"; }
 trap cleanup EXIT INT TERM
 
@@ -291,5 +303,75 @@ else
   fail=$((fail + 1)); printf '  FAIL --online reports an unreachable remote as its own fault\n       rc=%s got: %s\n' "$_rc" "$_out"
 fi
 
+# --- toolchain: golangci-lint must be built with Go >= GOROOT ---------------
+# Measured on koala 2026-09-08 (infra#375, second recurrence): golangci-lint
+# 2.11.4 built with go1.26.1 against a go1.27.0 GOROOT PANICS on any Go repo --
+#
+#   panic: file requires newer Go version go1.27 (application built with go1.26)
+#
+# and the earlier form of the same fault printed a typecheck error naming YOUR
+# file, so the natural response is to debug code that is fine. It cost time in
+# two repos. CI never sees it (the runner image matches), so it breaks only the
+# local `task check` that AGENT.md requires before every push.
+#
+# The fixtures inject fake `go` and `golangci-lint` on PATH; nothing here reads
+# the real host toolchain, so the suite still passes on a machine without Go.
+mk_toolchain() { # $1=fixture  $2=lint-build-go  $3=goroot-go   ("" = absent)
+  _b="$1/bin"; mkdir -p "$_b"
+  if [ -n "$2" ]; then
+    printf '#!/bin/sh\nprintf "golangci-lint has version 2.11.4 built with %s from abc on 2026-01-01\\n"\n' "$2" > "$_b/golangci-lint"
+    chmod +x "$_b/golangci-lint"
+  fi
+  if [ -n "$3" ]; then
+    printf '#!/bin/sh\ncase "$1" in version) printf "go version %s linux/amd64\\n";; *) printf "\\n";; esac\n' "$3" > "$_b/go"
+    chmod +x "$_b/go"
+  fi
+  printf '%s' "$_b"
+}
+
+f=$(new_fixture golangci_old); wire_clean "$f"
+b=$(mk_toolchain "$f" go1.26.1 go1.27.0)
+_out=$(PATH="$b:$PATH" HOME="$f/home" DOCTOR_CHECKOUT="$f/ck" "$DOCTOR" 2>&1); _rc=$?
+if [ "$_rc" -ne 0 ] && printf '%s' "$_out" | grep -qi 'golangci'; then
+  pass=$((pass + 1)); printf '  ok   golangci-lint older than GOROOT is reported\n'
+else
+  fail=$((fail + 1)); printf '  FAIL golangci-lint older than GOROOT is reported\n       rc=%s got: %s\n' "$_rc" "$_out"
+fi
+
+# Matching versions are the normal case and must stay silent.
+f=$(new_fixture golangci_ok); wire_clean "$f"
+b=$(mk_toolchain "$f" go1.27.0 go1.27.0)
+_out=$(PATH="$b:$PATH" HOME="$f/home" DOCTOR_CHECKOUT="$f/ck" "$DOCTOR" 2>&1); _rc=$?
+if [ "$_rc" -eq 0 ]; then
+  pass=$((pass + 1)); printf '  ok   golangci-lint matching GOROOT is silent\n'
+else
+  fail=$((fail + 1)); printf '  FAIL golangci-lint matching GOROOT is silent\n       rc=%s got: %s\n' "$_rc" "$_out"
+fi
+
+# A NEWER lint than GOROOT is fine -- the constraint is one-directional.
+f=$(new_fixture golangci_newer); wire_clean "$f"
+b=$(mk_toolchain "$f" go1.28.0 go1.27.0)
+_out=$(PATH="$b:$PATH" HOME="$f/home" DOCTOR_CHECKOUT="$f/ck" "$DOCTOR" 2>&1); _rc=$?
+if [ "$_rc" -eq 0 ]; then
+  pass=$((pass + 1)); printf '  ok   golangci-lint newer than GOROOT is not a fault\n'
+else
+  fail=$((fail + 1)); printf '  FAIL golangci-lint newer than GOROOT is not a fault\n       rc=%s got: %s\n' "$_rc" "$_out"
+fi
+
+# Fail OPEN on anything unparseable. doctor runs in a SessionStart hook on every
+# machine; a toolchain it cannot read is not a fault it may assert. (A host with
+# no Go at all takes the same path -- command -v simply misses.)
+f=$(new_fixture golangci_garbled); wire_clean "$f"
+_b="$f/bin"; mkdir -p "$_b"
+printf '#!/bin/sh\nprintf "golangci-lint dev build\\n"\n' > "$_b/golangci-lint"
+printf '#!/bin/sh\nprintf "go version devel\\n"\n' > "$_b/go"
+chmod +x "$_b/golangci-lint" "$_b/go"
+_out=$(PATH="$_b:$PATH" HOME="$f/home" DOCTOR_CHECKOUT="$f/ck" "$DOCTOR" 2>&1); _rc=$?
+if [ "$_rc" -eq 0 ]; then
+  pass=$((pass + 1)); printf '  ok   an unreadable toolchain version is not asserted as a fault\n'
+else
+  fail=$((fail + 1)); printf '  FAIL an unreadable toolchain version is not asserted as a fault\n       rc=%s got: %s\n' "$_rc" "$_out"
+fi
+
 printf '\ndoctor: %d passed, %d failed\n' "$pass" "$fail"
 [ "$fail" -eq 0 ]

tests/pre_task_ritual_test.sh

@@ -0,0 +1,103 @@
+#!/bin/sh
+# Tests for hooks/pre-task-ritual.sh — the UserPromptSubmit hook that surfaces
+# rule 0 on every prompt (#44).
+#
+# WHY THIS EXISTS, AND WHAT IT DELIBERATELY DOES NOT CLAIM
+# This hook is three lines and echoes a string. It has no bash-isms, so it
+# cannot fail the way secret-guard appeared to; that risk was overstated when
+# this test was requested. What it CAN do is stop working silently, and its
+# whole job is to be visible -- if the text stops appearing, rule 0 stops being
+# surfaced on every prompt and nothing announces that.
+#
+# THE ASSERTION THAT MATTERS IS REGISTRATION.
+# A hook file that exists but is not in hooks.json does absolutely nothing, and
+# looks identical on disk to one that works. So this derives the command from
+# hooks.json rather than assuming one: the registration is the source of truth
+# for how the hook is invoked, and a test that invokes it its own way is
+# testing something the harness never runs.
+#
+# That distinction is not hypothetical. secret_guard_test.sh piped its hook into
+# `sh` while hooks.json runs it with `bash`; on Debian /bin/sh is dash, which
+# has no `set -o pipefail`, and the suite failed 20/20 in CI against a hook that
+# was fine in production. The test was wrong, not the hook. Deriving the
+# invocation removes the opportunity for that class of mistake entirely.
+
+set -u
+
+ROOT=$(CDPATH= cd -- "$(dirname -- "$0")/.." && pwd)
+HOOK="$ROOT/hooks/pre-task-ritual.sh"
+REG="$ROOT/hooks/hooks.json"
+
+pass=0
+fail=0
+ok() { pass=$((pass + 1)); printf '  ok   %s\n' "$1"; }
+no() { fail=$((fail + 1)); printf '  FAIL %s\n' "$1"; }
+
+if ! command -v jq >/dev/null 2>&1; then
+  printf '  SKIP: jq not installed -- cannot read the hook registration\n'
+  exit 0
+fi
+
+[ -f "$HOOK" ] || { printf '  FAIL %s does not exist\n' "$HOOK"; exit 1; }
+ok 'hook file exists'
+
+[ -f "$REG" ] || { printf '  FAIL %s does not exist\n' "$REG"; exit 1; }
+
+# 1. Registered, and on the right event. UserPromptSubmit is what makes it fire
+#    on every prompt; registered under any other event it would still "exist"
+#    and still do nothing useful.
+CMD=$(jq -r '
+  .hooks.UserPromptSubmit[]?.hooks[]?
+  | select(.command | test("pre-task-ritual"))
+  | .command
+' "$REG" 2>/dev/null | head -1)
+
+if [ -n "$CMD" ]; then
+  ok 'registered on UserPromptSubmit in hooks.json'
+else
+  no 'not registered on UserPromptSubmit -- the file would exist and never run'
+  printf '  %d passed, %d failed\n' "$pass" "$fail"
+  exit 1
+fi
+
+# 2. Run it EXACTLY as registered, with the harness variable substituted the way
+#    the harness substitutes it.
+OUT=$(CLAUDE_PLUGIN_ROOT="$ROOT" sh -c "$CMD" 2>&1)
+rc=$?
+
+[ "$rc" -eq 0 ] && ok 'exits 0 as registered' \
+  || no "exited $rc -- a non-zero UserPromptSubmit hook can block the prompt"
+
+# 3. The content is the point. A hook that runs and says nothing is the same as
+#    no hook, and that is the failure this pins.
+if [ -n "$OUT" ]; then
+  ok 'produces output'
+else
+  no 'produced no output -- rule 0 would silently stop being surfaced'
+fi
+
+case "$OUT" in
+  *"Rule 0"*) ok 'names rule 0' ;;
+  *)          no "does not name rule 0: '$OUT'" ;;
+esac
+
+# Each of the four steps, individually. Naming rule 0 while having quietly lost
+# a step is the plausible drift, not losing the whole line.
+for step in brain_query skill 'failing test' 'success criterion'; do
+  case "$OUT" in
+    *"$step"*) ok "states the '$step' step" ;;
+    *)         no "lost the '$step' step from the ritual" ;;
+  esac
+done
+
+# 4. The interpreter named in the registration must actually exist, or the hook
+#    fails on that host with a message nobody reads.
+INTERP=${CMD%% *}
+if command -v "$INTERP" >/dev/null 2>&1; then
+  ok "registered interpreter '$INTERP' is available"
+else
+  no "registered interpreter '$INTERP' not found on this host"
+fi
+
+printf '  %d passed, %d failed\n' "$pass" "$fail"
+[ "$fail" -eq 0 ]